Storage Tank Solar Water Heater(Vacuum Tube Solar Collector)
Specialty
1. Economical type for most of area,common people can afford it
2. Simple product structure: solar collector and water tank connected together directly, no need of pipe to connect, and no pump to push fluid
3. Mature technology and stable operation
4. higher efficiency on photo thermal conversion.
5. Accessory is popular and easy maintenance
Solar water heater Specifications:
1) Inner tank thickness of solar heater: 0.4mm
2) Outer tank thickness of solar heater: 0.4mm
3) Inner tank of solare water heater: SUS304 food grade stainless steel.
4) solar water heater Outer tank: Colorful steel, 0.4mm
5)solar water heater tank capacity: 80L/100L/120L/150L/180L/200L/240L/250L/300L
6) Thickness of solar water heater bracket: 1.5mm
7) Glass vacuum tube of solar water heater: 58mm x 1.8mm
Remark:
1.Solar heat storage tank diameter(mm): 460mm/480mm
2.Thickness, insulated(mm): 50mm
3. Vent connection(inch): 1/2''or /3/4''
4. Electric heater:47mm 1500w,3/4''
5. Water connection(inch):1/2'' or 3/4''
6. Collector angle(degree): 25-45
| Technical parameter of compact non pressure solar water heater |
| DESCRIPTION | Non-pressurized solar water heater |
| CAPACITY(TUBES-LITER) | From 6tubes-60liter to 50tubes-500liter |
| MATERIAL OF OUTER TANK | 0.4mm galvanized steel/0.4mm sus304 stainless steel /0.4mm sus304-ba(bright) |
| MATERIAL OF INNER TANK | 0.4mm/0.5mm/0.6mm sus304-2b stainless steel or sus316 stainless steeel |
| TANK INSULATING LAYER | 50-60mm high-density polyurethane foamed |
| DIAMETER OUTER/INNER TANK | 420/310mm 460/360mm 470/360mm 480/360mm |
| ELECTRICAL HEATER | 1500w/2500w/3000w; 220v/110v |
| INLET AND OUTLET HOLE | Male 1/2", 3/4" |
| MAX PRESSURE | 0.05 mpa |
| SOLAR COLLECTOR TUBE | 3.3 borosilicate glass with AL/AL-ALN/ALN(single target) or CU/SS-ALN/ALN(three target) |
| THICKNESS OF GLASS TUBE | 1.6mm |
| VACUUM TUBETIGHTNESS | P≤ 0.005 pa |
| ABSORPTION | As=0.93-0.96(am1.5) |
| EMISSION RATIO | Ε h=0.04-0.06(80c± 5c) |
| IDLE SUNNING PROPERTY PARAMETERS | Y=220~260m². C/kw |
| AVERAGE HEAT LOSS COEFFICIENT | Ult=0.6~0.7w/(m2. c) |
| BRACKET: | 1.2mm Stainless steel/1.6mm aluminum alloy/1.5mm galvanized steel |
| STRUCTURE OF TANK: | Usually holes for air vent, overflow, water inlet and outlet, electric heater; custom-built will be warmly welcomed. |
| WELDING: | Automatic argon arc welding |
| FASTENING PIECES: | Stainless steel screw |
| SEAL MATERIAL | Stabilized high temperature silicon |
| OPTION-1(WITHOUT ELECTRICAL HEATER): | Assistant tank 3L, 5L, 8L,12L,30L,50L as a automatic watering part. |
| OPTION-2(WITH ELECTRICAL HEATER): | Electrical heater as extra built-in heating part, controller control the system watering and heating automatically |
Non-Pressurized Solar Water Heater Solar Collector
| Model | Tube QTY | Tube Size | 20'GP | 40'GP | 40'HQ |
| JCN-C100L | 10 | 58×1800MM | 66 | 138 | 174 |
| JCN-C120L | 12 | 58×1800MM | 55 | 114 | 144 |
| JCN-C150L | 15 | 58×1800MM | 44 | 91 | 115 |
| JCN-C180L | 18 | 58×1800MM | 37 | 78 | 98 |
| JCN-C200L | 20 | 58×1800MM | 35 | 72 | 91 |
| JCN-C240L | 24 | 58×1800MM | 29 | 60 | 76 |
| JCN-C300L | 30 | 58×1800MM | 23 | 49 | 62 |
| JCN-C360L | 36 | 58×1800MM | 20 | 41 | 52 |
){kind=link}